HANGZHOU FEIFEI CHAIN CO., LTD

Detailed introduction

Car snow chain

9MM

• Diamond pattern design, wire of cross chains: 3.0x2.5mm
• Unique “D” type square link design, gaining excellent traction
• 9mm projection for limited clearance applications, recommended for passenger vehicles, SAE class: “S”
• Zinc electro galvanizing, antirust and attractive 
• Flexible steel cable covered with plastic sheath
• Very easy installation, mounting without moving or lifting the car 
• Includes gloves, repair links and mounting instructions
• 1 pair per nylon pack or plastic case, 5pairs/ctn/0.03cbm
• Certifications: O-Norm V 5117, TUV/GS

30 MPH—Max. Chain Life

Other classification

KNS 9mm Passenger Car Snow Chains

KN 12mm Passenger Car Snow Chains

KL 12mm Passenger Car Snow Chains

KP 12mm Passenger Car Snow Chains

KNT 7mm Passenger Car Snow Chains

KB 16mm 4WD Snow Chains

11 Series Passenger Car Snow Chains

18 Series Passenger Car Snow Chains

10 Series Passenger Car Cable Chains

20 Series Truck Cable Chains

TN Truck Snow Chains

TNP Truck Snow Chains

22 Series Single Truck Snow Chains

28 Series Single Truck Snow Chains

42 Series Dual-Triple Truck Snow Chains

48 Series Dual-Triple Truck Snow Chains

32 Series Wide Base Single Truck Snow Chains

38 Series Wide Base Single Truck Snow Chains

24 Series Single Mud Service Snow Chains

44 Series Dual-Triple Mud Service Snow Chains

21 Series Square Straight Link Alloy Truck Snow Chains

26 Series Grader & Equipment Snow Chains

Roadmaster Tractor Snow Chains

DUO Grip Tractor Snow Chains

Forklift Snow Chains

ATV/UTV Snow Chains

Snow Blower & Garden Tractor Snow Chains

Emergency Steel Snow Chains

Emergency Plastic Car Snow Chains

Snow Socks

FEATURES TN Truck Snow Chains

Anti-storm

Waterproof

Sand prevention

Rules for Using Tire Chains:

IMPORTANT:Prefit Chains Prior to Actual Use!

For Your Convenience & Safety:

Consult owner’s manual to see if chains can be used on your vehicle.

Make certain your tire chains are properly sized for your tires.A proper fit is key to performance.

Follow directions for installing tire chains.Apply as tightly as possible by hand for maximum chain life.

Be sure to pull off highway to safe place before installing, servicing or removing tire chains.

Do not deflate tires to install tire chains.

Drive approximately 1/4 mile.Stop & retighten.Extra links may be cut off or preferably retained on the fastener arm.Keep chains tight to snug throughout the operation.Only after retightening may rubber adjusters be applied.

Do not exceed 30 m.p.h.Accelerate and decelerate slowly.Avoid spinning or locking of wheels.

If a cross chain should fail, stop immediately.Repair or remove.Do Not drive with a broken chain.

Avoid hitting curbs with tire chains.

Tire chains are not designed for towing vehicles.

NORMAL

(Chains installed as tight as possible by hand.)

30 MPH—Max.Chain Life

40 MPH—57% Chain Life

50 MPH—31% Chain Life

LOOSE

(Chains loosened by one link each side.)

30 MPH—50% Chain Life

40 MPH—16% Chain Life

50 MPH—7% Chain Life

Send an enquiry

Deﬁnitions of SAE Classiﬁcations

SAE Class “U” – Regular (non-reinforced) and lug reinforced passenger tire chains for vehicles with regular (non-restricted) wheel well clearances.

SAE Class “S” – Regular (non-reinforced) passenger tire chains and cables for vehicles with restricted wheel well clearances.

SAE Class “W” – Those passenger tire chains that use light truck components, as well as some light truck chains

What our

Clients Say

Mr. Philippe Gy's risk of successfully avoiding tires in Normandy in northern France saved a lot of burden